Cabinet for utensils washed and sterilized.
It consists of a water tank heated by electric heaters.
Aims tank pump that feeds sprinklers with rotary motion
launderers-sterilized and rinse utensils.
The complete cycle of the machine consists of washing and rinsing-sterilized, and is done in close
mately 5-10 minutes.
Made of stainless steel AISI 304.
Length: 2,300 mm
Width: 1,702 mm
Height: 2,040 mm
Maximum temperature: 90 ° C.
washing-sterilized temperature: 50-82ºC.
Leveling machine with adjustable feet.
Sound pressure level below 80 dB (A).
Tap water connection stainless steel ball 1. "
Electrical connection to 400 V (III + N + T).
50 liter tank.
Water inlet controlled by solenoid valve 1/2 ".
Water level maintained by the level detector.
Type filter drawer grid, with triangular profile sheet 1.5mm drilled to 2mm diameter.
Emptying by solenoid 2 ".
Water heating by four electrical resistors 6000 W.
Temperature control via electronic thermostat OSAKA (washed, sterilized) and probe.
WASH - RINSE - POLISHING:
5.5 Kw stainless motor pump, 2900 rpm, 380V, with a flow rate of 32 m3 / h and a pressure of
4.3 Kg / cm2.
Rinse with cold water.
Stainless steel flat jet sprinklers.
Sprinklers distributed over two rings with rotary motion.
Rings driven by the same water pressure.
Rotaticón shaft supported on bearings in stainless steel.
electrical control panel fiber inside the machine, installed power of 29.5 kW, IP-65
with thermal protectors with PLC control and maneuver 24 V.
pendant mounted on stainless steel sheet, with elements: temperature controller, timers
External adores (washing-sterilized), 2 buttons on / off cycle, general switch and
Door seal with safety switch when opening.
Emergency stop blocking the machine.
Both the emergency stop, such as door security involve a reset cycle.
Three washing programs.
Deposit: 50 liters.
Rinse: 15 liters / cycle.