Lifting and dump of tipus Dolav tanks of 620Lts. of 1,200x1,000x740mm.
Maximum height discharge 2,770mm.
Dimensions with protections: 2,120 x 2,565 x 4,020 mm.
Construction in AISI 304 stainless steel.
Maximum lifting load 600 kg.
With lifting column on the right as seen from the loading area.
Fixed base with 12mm plate with holes to fix to the floor.
The lift does not have any upper tie to hold the column. The base is fixed on
the floor, which is the only fixing point.
The column is reinforced by a tubular structure located below the engine and
reaching the base of the floor. This tubular carries a 50x50x4 metal mesh that
serves as a protection on one side.
Tubular protection with metallic mesh of 50x50x4 up to 2.2 meters high to
avoid entrapment with the container and access to the elevation area.
Double sliding front door with magnetic safety detector, which prevents the
container from raising and lowering if the doors are open.
Speed: 4.4 m / min.
Discharge height from 2,770 to 2,270 mm, adjustable every 50mm.
Lifting by worm and brass nut.
Engine of 4 kW 900rpm IP55 IE2 with brake.
Mechanism of security in the case of wear of the nut or the auger.
Electric control panel fixed on the column, with inclined roof, in stainless steel.
Up and down buttons, with stop in any position.
Maneuver at 24VAC.
Voltage 230 / 400V III + T (50 / 60Hz) (to be specified)